Author Archives: Absolute Precision Plumbing and Heating

Are Electric Water Heaters Good?

3d rendering of white electric boiler with smart control on the  wall. Energy saving concept

Learn More About Electric Water Heaters

When it comes to heating your property there are many options available from tank, tankless, gas, and electric water heaters. Depending on your lifestyle and preferences you may be able to choose the one that’s right for you. However, an electric water heater is a great way to streamline your energy and source your water heater’s power from existing electrical lines. Having an electric water heater won’t take up as much energy as one would think and features many advantages such as longer life expectancies and smaller sizes that won’t take up as much space. If you’re curious as to how an electric water heater works read on and afterward make sure to speak to an expert HVAC company for more information. Here is some general background information regarding an electric water heater that may prove of use to you in the meantime.

Are new electric hot water heaters more efficient?

An electric water heater is able to reduce excess heat loss and the smaller the tank the higher the efficiency rating will be. They are more efficient as water will not need to be heated constantly which can lead to energy savings. They will also not take up as much space since they won’t need the addition of a release exhaust.

Do water heaters use a lot of electricity?

An electric water heater with a tank will run 3-5 hours a day which can cost a little over a dollar per day if it’s with a 4,000 watt heater. 

How many years does an electric hot water heater last?

An electric water heater can last about 8-12 years based on the manufacturer’s service life yet this amount of time will vary by the design of the unit, the location, following with maintenance schedules, the quality of initial installations, and water quality. With proper maintenance, a tank electric water heater can last up to 15 years and a tankless one can surpass 20 years. Checking your unit’s warranty will give you the realistic expectation of a timeline.

Are electric water heaters dangerous?

An electric water heater can result in danger if they are installed incorrectly or are neglected from a lack of routine maintenance. They can result in electric shocks, fires, severe burns, and explosions.

How often should you flush your water heater?

An electric water heater should be flushed every six months yet if hard water is running through it will be necessary to do it more often. Depending on the mineral content of your local water supply your electric water heater system will need to be cleaned in order to avoid corrosion or buildup.

Should I turn my water heater off at night?

When it comes to using an electric water heater turning it off at night is 100% efficient for heating. You can use a timer to set up a schedule to turn off water heating during sleeping hours or when you are away from the property.

Is it better to leave the water heater on all the time?

It will be up to you on whether you prefer to make the effort of turning off or on an electric water heater. With tanks, as long as there is a good insulating jacket water can be kept hot all day without needing to be constantly heated. As such it is better to turn off the heater to save on energy use.

Does an electric water heater need a vent?

Unlike a gas tankless water heater an electric water heater won’t require any venting.

How do I choose an electric water heater?

When it comes to selecting your electric water heater there are things to consider such as size, energy efficiency, and cost. To provide your property with the maximum energy efficiency you’ll need the right size water heater. Consider the family size and how often you’ll use your water heater to determine the right capacity. To save the most on costs and maximize energy use you’ll want to see how energy efficient a water heater is based on proven ratings. Finally, estimate the annual operating costs of your water heater in order to figure out which energy-efficient models are the best for you.

Electric water heater with cut out the room reaches a certain temperature, close up view

What is the best electric water heater?

  • Rinnai RLX Series HE+ Tankless Hot Water Heater
  • Funwill Electric Mini-Tank Water Heater
  • Eemax EEM24027 Electric Tankless Water Heater
  • Denshine 50L/13 Gallon Electric Hot Water Heater
  • Ariston Andris 8 Gallon Mini-Tank Electric Water Heater
  • Rheem 240V 3 Heating Chambers RTEX-24 Residential Tankless Water Heater
  • Camplux ME25 Mini Tank Electric Water Heater
  • Tankless Water Heater Electric by ECOTOUCH
  • Bosch Electric Mini-Tank Water Heater Tronic 3000
  • Stiebel Eltron 36 Trend Tempra Tankless Water Heater

Get Assistance With an Electric Water Heater Today

If you’re interested in an electric water heater speak to an expert HVAC representative to see what your options are. Based on your property specifications and other information the right electric water heater model can be determined that will save you in energy costs and provide smoother operations. Enjoy hot water and heated rooms with an electric water heater today and speak to a professional soon to get started.

If you’re interested in an electric water heater in Saddle Brook, NJ call 551-257-6200 with Absolute Precision Plumbing and Heating!

Does a plumber fix gas lines?

gas meter with yellow pipes

What to do with a gas leak

One of the most dangerous things that we can have around or in our homes is a natural or propane gas line leak. This is one reason, the primary reason, that is recommended to have a professional gas line inspection once a year.  This inspection time can eliminate our families from being sick or saves our homes from exploding.

A gas line leak isn’t a visible leak, you can’t see gas, but you should know what a leak in gas line smells like gas so you can act immediately, starting with turning the gas off and vacating the house.  Next, you should call the gas company that supplies the gas to your house, then call a plumber for emergency gas line repair and/or gas line repair in house. The gas company will require this before they will turn the gas back on.

How do you fix a gas line leak?

A gas line leak will occur when the pipe that the gas is transported through from the gas source to various locations within your home get a break, holes, scratch, or tear. That opening allows the natural gas or propane to leak out as it relieves the high pressure. 

As we stated earlier, a gas line leak is dangerous and getting everyone in the house to safety should be your primary concern. Once that has occurred, it is the general recommendation to call the gas company to turn the gas off then call a plumber to repair the gas line leak. 

There is many homeowners capable of repair a gas line leak themselves with some instructions, which we offer the following steps:

  • Step One – Turn the Gas Off: Because it is extremely dangerous to work with gas, we cannot stress the importance of turning the gas off when a leak is discovered and when working on the gas lines.
  • Step Two – Remove the Covers: Gas lines have outer plastic covers that you must remove so you can get to the gas lines underneath. To keep your respiratory system safe, wear a gas mask that will keep you from inhaling the dangerous gas. Wearing gloves is recommended too.
  • Step Three – Disconnect the Gas Line: A gas line leak results from high pressure inside the gas line. Begin your repair by removing the low-pressure line from the gas regulator.
  • Step Four – Eliminate the Residue Gas Pressure: The gas lines will contain gas residue that needs to be removed before repairing the gas line. This is done by using a wrench to crack the gas line fittings in the high-pressure line.
  • Step Five – Clean the Gas Line: The gas line will have impurities inside that can cause the gas line to leak again. Using acetone, clean those impurities out of the high-pressure line.
  • Step Six – Abrade the Surface: With sandpaper, abrade the surface of the gas line surface to even it using the acetone, clean it again.
  • Step Seven – Connect the Gas Line: Connect the gas line, ensuring that it fits well but loose enough it doesn’t create a new leak. Apply rubber tape, aka as plumbers’ tape, to reinforce the gas line connection grip to safeguard that it seals the leak. Verify that the angle is correct and there isn’t any interference between the high-pressure gas line and low-pressure gas line.
  • Step Eight – Use the Epoxy: Following the package directions, apply the epoxy on the gas line and allow it to sit overnight for curing, making sure it is held firmly in place. After it has cured, tighten the high-pressure gas line fittings and reinstall the low-pressure gas line.
  • Step Nine – Test the Gas Lines: Now it is time to test the gas line to confirm the repair is successful – turn the gas on. If are still leaks, repeat the steps again until you’re 100% certain there are none. If you’re not finding leaks but still smell gas, turn the gas off and call a professional plumber.
  • Step Ten – Replace the Plastic Covers: Replace the plastic covers once you are 100% certain you have fixed all leaks. 

How long does it take gas to dissipate?

Natural or propane gas will dissipate in five minutes if the gas line connections are secure and all gas leaks are repaired. If you are still smelling gas after 5 minutes of reconnecting, then turn the gas off again and look or other leaks or ill-fitted connections.

Are gas leaks common?

On average, gas line related explosions cause less than 2 dozen deaths a year in the United States. Statistically, autoerotic, asphyxiation and falling out of bed cause more deaths, with 600 and 450 respectively.

burner running smoothly on gas

Is there a gas leak detector?

Your nose is the best gas line leak detector.  While they tout gas to be the cleanest and safest way to cook or heat your home, it can be dangerous if there are gas appliance malfunctioning or gas line leaks.  

We cannot stress it enough: If you smell or suspect a gas line leak, evacuate the area immediately and call 911, then the emergency line of the gas company. Here are signs that indicate a gas line leak:  

  • The rotten egg or a sulfur smell
  • Hissing or whistling sound coming from a gas line.
  • Dust or white cloud near a gas line.
  • Bubbling water.
  • Damaged gas line.
  • Dead houseplants.

Does homeowners insurance cover gas line repair?

As with any other homeowner’s insurance coverage question, we always recommend reviewing your own policy or call your insurance agent because not all policies are the same. Typically, if a natural gas line ruptures, it may be covered or if a contractor ruptures a gas line while working on a home or on the property, your homeowner’s policy may cover the repair. If the gas line rupture is caused by the gas company, they will cover repairs.

Again, any smell of natural or propane gas coming unexpectedly and unexplainable within or around your home, evacuate the area and call 911 immediately, then call the gas company. Gas is one of the cleanest ways to provide power to your home for cooking and heating. It is safe in normal situations but can be dangerous if leaks are ignored. Never second guess your concerns when it comes to gas. Call 551-257-6200 today for your gas leak repair in Saddle Brook, NJ.

How do you fix low water pressure?

low water pressure from showerhead

Comfortable water pressure in your home

What is water pressure? For many of us, maybe even most of us, that seems like a needless question, but for the sake of this article and the topic, let’s discuss what exactly is water pressure?

As a homeowner, we all take for granted when we have good water pressure. Getting up in the morning for that exhilarating shower that gets your body in motion is the best… until you don’t have good water pressure. While strong water pressure feels good in the morning, it is doing havoc on the plumbing if it is too strong.  Yes, water pressure can be too strong. Not to mention, what it is doing to your water bill.

In residential areas, water comes from the municipal water provider, usually from groundwater sources or surface water like lakes, reservoirs, and rivers. That water is pumped to a facility where it is treated to make healthy and safe and then sent on to pressure tanks are in high points all through the distribution area. Sometimes, that high point is a water tower.

The height of the water tanks and where the distribution area is located, plus the weight of this water is how water pressure is generated. The higher the water tank or water tower, the better the water pressure.

What causes low water pressure in the whole house?

When the water pressure in your home is noticeably low, it can be a concern, and legitimately so. It can be as simple as a shut-off valve is closed, or a faucet is blocked. It can also be something more like a blockage or a leak.  It can also be something that you have no control over, like the city working on the water lines.

Because there are so many possible causes creating low water pressure, you need to go through some troubleshooting steps to determine the cause. You could even find that there are several issues, so you must examine several areas. The following steps are suggestions that may narrow down the problem:

  1. Turn the cold and hot water on at all faucets. If only hot water has low water pressure, this could indicate a problem with the water heater. If the problem is only at one faucet, then it could be clogged or the aerator needs replacing. If the water pressure is a low cold and hot faucet and in multiple areas, then it is most likely a general problem.
  2. Next, you must check the pressure reducing valve and water shut-off valve. The pressure reducing valve is bell-shaped, adjust it by tightening the screw clockwise. If this didn’t help, check the water meter shut-off valve and turn it slightly.
  3. Now check all the faucets, cold and hot, again. If you still have low water pressure, you could have a leak. Make sure all faucets are off and no toilets are filling, then check the water meter. If the needle is moving, you have a leak and need to call a professional plumber.

How do I increase water pressure in my home?

Most of the things that can increase your water pressure are things you can do yourself once you know how to better water pressure. If the water pressure is the hot water only, check your water heater, and that alone can have various reasons that cause a drop in pressure. Leaking pipes and leaky toilet mechanisms can affect water pressure.

A few things you can do yourself to improve water pressure:

  • Remove the aerator from each faucet and clean it.
  • Check the faucets and if you see any issues, repair or replace.
  • Replace old water supply pipes. This will entail the services of a professional plumber. Have them checked the size of the pipes too, they may be too small.
  • Check with the water department if there is a city-wide issue. If not, ask for the “static water pressure” for your neighborhood, the results from water pressure testing that all jurisdictions must perform from time to time.
  • You can purchase a water pressure gauge at a home improvement store and test the water pressure by attaching the pressure gauge to a hose bib.

Why is my hot water pressure lower than my cold water pressure?

If only one fixture has low hot water pressure, check the water valve. Check the water lines running to the faucet, there may be a crimped or pinched area.  If the hot water pressure is low all through the house, it is probably at the water heater, and the common problem there is a build-up of sediment in the tank.

Sediment build-up is common in areas with hard water. Hard water has loose minerals in it, and they settle in the tank’s bottom. When sediment has built up far enough, it can plug the pipes and reduce your water pressure. A professional plumber who will flush the tank can remedy this.

What happens if your water pressure is too high?

Leaks are the most common result of high- water pressure in the plumbing system It may be a small pinhole leak that only intermittently leaks, but it can create and lead to bigger problems. High water pressure or inconsistent water pressure puts stress on appliances, including the water heater. That stress shortens their lifespan.

What Causes This High- water pressure Problem? If you live at the top of a hill, your water pressure is likely to be low and just the opposite when you live at the bottom. Gravity. Water will always run downhill naturally, and the local water authorities will adjust the water pressure to higher PSI to meet the demands of local businesses and fire hydrants.

water pressure in a shower

Is low water pressure dangerous?

There are a few different things that contribute as causes of low water pressure, one that is most frequent is due to installation issues, such as undersized piping. Low water pressure can also be from the pipe being filled with scale deposits, for a house on a good system, minimal pump pressure is a frequent problem.  

A common and one that no homeowner wants to have is a pipe leak underground. This doesn’t always mean it is the homeowner’s issue if the leak is outside their property lines. A municipal water system that is aging and the population is growing and can often put a strain on the water system.

Keeping tabs on your water pressure is important because you can often catch a problem of a small leak before it becomes a bigger leak with a bigger problem. Just as having your gutter system cleaned regularly is important to prevent roof, siding, and foundation problems so are catching leaks and having them repaired. For help with your water pressure in Saddle Brook, NJ, dial 551-257-6200 today.

How Residential Plumbing Works

Plumber with Clipboard & Tool Belt with House in Background

Learn More About Residential Plumbing

Residential plumbing is a system of plumbing that differs from their commercial counterparts yet works similarly in the essential functions plumbing. Your home will have different specifications and will have plumbing materials and systems that will differ by the material. It’s important therefore to reach out to a professional when new plumbing systems are needing to be installed. Even maintenance and repairs can be essential in preventing large scale issues. In order to have scenarios fixed in accordance to your property, a professional residential plumbing inspection will be necessary to properly gauge what course of action needs to be taken. Until then, here is some basic information surrounding residential plumbing that may prove useful for you and the betterment of your property.

What are the different types of plumbing?

The different types of plumbing that’s available are commercial and residential plumbing. These two plumbing systems are similar but different as commercial systems will have different property layouts.

What is a residential plumber?

A residential plumber is someone who handles residential plumbing or plumbing that involves homes and not businesses. A residential plumber can install and repair pipes that supply gas and water into the home as well as pipes that carry waste away. Fixtures can also be installed such as with sinks, toilets, bathtubs as well as appliances such as dishwashers and washing machines.

What is plumbing system in house?

residential plumbing systems comprise a system of pipes such as those for drains, water supply, and venting. Essentially freshwater is delivered from a well or utility by water supply pipes and then sent to washers, sinks, toilets, bathtubs and other water-using fixtures.

How plumbing works in a house?

There is first your home’s supply and drain systems that are separate without overlaps. Bridges between the two systems are the fixtures. Air that’s admitted by vent pipes and vent stacks keep the traps sealed in order to prevent sewer gases from backing up drains.

What size pipe for residential plumbing?

Most cases of residential plumbing for the main water line from the street to the home typically will be ¾ or 1 inch in diameter. Individual components are ⅓ inch and supply branches 2/4 inch in diameter. Water pressure will decrease by half-pound per square inch of every foot that a pipe extends above your water supply.

Plumber with Plumbing Tools on the Kitchen

Residential Plumbing Inspection Checklist

  • Water heater
  • Branch shutoff valves
  • Sump pump
  • Outdoor hose spigots
  • Irrigation system
  • Washing machine
  • Checking the home water pressure
  • Sink drains
  • Faucets
  • Refrigerator
  • Septic system
  • Sewer main
  • Vent pipes
  • Toilets
  • Caulk seals

Residential Plumbing Insurance

Homeowners’ insurance policies might be able to cover any damaged associated with your residential plumbing if damages were incurred accidentally or suddenly. However, any issues made from time like aged pipes or leaky pipes aren’t typically covered. As such, homeowners’ insurance can cover your personal property and home from such as loss or damages caused by severe weather, fire and certain types of water damages.

How much do plumbers charge?

The cost of residential plumbing will differ by the company yet you can expect a typical per hour average cost to be $45-$200. Some companies have costs based on the type of job being done. Others will have a fee for a plumbing call or in some instances for coming out to the property to determine damages. Sometimes this fee will be waived or credited to the job being done if work is accepted. Plumbers can also charge a flat rate or service fee which on average costs $300. Emergency plumbing will often cost more than the general cost when waiting for the closest availability for a plumbing job. It’s recommended to do previous research before making a call in order not to be surprised by any fees.

How much does it cost to put new plumbing in a house?

The cost of installing new residential plumbing will depend on the extent of construction. For an average 2,000 square foot home with 2-3 bathrooms, you may see $4.50 per square foot. Average costs can thereby run as $8000-$12,000. With repiping a home that’s already established a house of the same size can run at $3,100-$5,500 or $.40-$2.00 per linear foot.

Contact A Professional For More Assistance

If you’re interested in having a residential plumbing service be sure to contact a professional plumbing company for assistance. There are several options for your residential plumbing in Saddle Brook, NJ so be sure to choose a company that you can trust. Like chimney cleaning services will differ depending on the specifications of your property and the extent of damages. A  residential plumber will be able to inspect your property for any maintenance or repair needs for your residential plumbing so your systems can work optimally no matter the season. If you’re having any plumbing issues or questions speak with a professional plumber today for more information.

If you’re interested in residential plumbing in Saddle Brook, NJ call 551-257-6200 with Absolute Precision Plumbing and Heating!

Is a Tankless Water Heater Worth it?

completed tankless water heater installation

The Different Ways to Update Your Home

Are you struggling with a lack of hot water? Do you wish that you could just turn on the tap and have hot water almost instantaneously? If so, you may be interested in a tankless water heater. These are incredible units and systems that offer a variety of options, energy savings, and money savings. You can have a home with an almost endless supply of hot water! To learn more about a tankless water heater installation in Saddle Brook, NJ, connect with Absolute Precision Plumbing and Heating. Dial 551-257-6200 to get started. 

old tank heater to be replaced by a tankless water heater installation

Investing in a Tankless Water Heater

What actually is a tankless water heater? This is an appliance that pulls water from your property source and heats it, either through an electrical or gas element and distributes it throughout the property. In a nutshell, it is an on-demand water heater. Is it worth investing in? Well, that is dependant on several things.

Most homes are not designed for a tankless unit. There are, in fact, several tankless water heater installation requirements that need to be addressed before the installation can actually take place. This includes location, wiring, gas line installation, and more. Because of this, the tankless water heater installation cost can increase drastically making it seem impossible or improbable for many homeowners. While installation costs are steep, there are many savings to be had with a tankless unit. More than you’ll typically experience with a traditional system. That in mind, you need a proper installation to truly reap those benefits. Yes, you can search for how to do a tankless water heater installation, but as mentioned, there can be a lot more that goes into the process. Similar to a 10 step vent cleaning process. Rather than risk damaging your water heater or your property, why not rely on the professionals. For that, trust Absolute Precision Plumbing and Heating. 

Benefits of a Tankless Water Heater Installation

Of course, the big question is, are tankless water heaters worth it? The answer is, yes, the really are. If you plan on staying in and investing in one location for a while, then the tankless water heater is a great choice for you. There are several advantages that homeowners can benefit from with this type of appliance. 

  • Demand Supply: Tankless water heaters provide hot water, essentially, on demand. Rather than storing a tank of hot water, when you turn on a faucet, within seconds, you will have warm to hot water. This saves an incredible amount of water and energy.  
  • Compact Size: One of the big draws to this type of water heating system is the fact that tankless heaters are much more compact than their traditional counterparts. You won’t have to take up as much space since there isn’t a 50-gallon tank to account for. 
  • Energy-Efficient: As mentioned, with a tankless heater, there is no stand-by water. There is no excess of energy because there is no pilot light or electrical system keeping a whole tank of water warm. Instead, you have a quick heating system that brings the water temperature where it needs to be quickly. 
  • Lifespan: The lifespan of a tankless water heater is probably one of the greatest advantages for homeowners. While most traditional water heaters have a lifespan of about 10-15 years, a tankless heater will last you upwards of 20 years or more. 

While traditional water heaters have the draw of being much more inexpensive, they can be prone to repetitive repairs and maintenance. Tankless heaters, when installed correctly, can last you several years with little to no maintenance needed. Even when you do need any kind of water heater repair, you can rely on the experts at Absolute Precision Plumbing and Heating for help.

Frequently Asked Questions

  • How much does a tankless water heater cost with installation? 
    • There’s no getting around it, tankless water heaters expensive. The cost of the unit by itself can run as low as $1,000 with rewiring and installation costs pushing the total up to $5,000 or more. 
  • What is the downside of a tankless water heater? 
    • Too often, homeowners get tankless water heaters that are too small. This results in the inability to provide hot water for simultaneous chores, such as laundry and washing dishes. Or if the water heater is gas-powered, quite a bit of energy can be wasted needing to heat the water up every single time.
  • How big of a tankless water heater do I need? 
    • Most homes will need a tankless water heater that is 5.2 gallons. It will be able to produce a 60-degree rise in temperature, heating the water, at 5.2 gallons per minute. This is often faster than most traditional water heaters.
  • Do tankless water heaters run out of hot water? 
    • While tankless water heaters are designed to operate more efficiently, there are some disadvantages just like any other system. With a tankless heater, if there are too many sources trying to get hot water, your tankless heater can run out of hot water faster than it normally would. 
  • Which is better gas or electric tankless water heater? 
    • It will depend on your current set up. If your home is already set up for an electric water heater, but you want to invest in a gas heater, you may run into some trouble and vice versa. That in mind, you can talk to a Absolute Precision Plumbing and Heating technician to learn about which option is best for you.
tankless water heater installation

Connect With Our Team for More Information

Dial 551-257-6200 for Absolute Precision Plumbing and Heating, the best team to rely on when you need a tankless water heater installation in Saddle Brook, NJ. We look forward to hearing from you.

How Does LeakSMART Work?

A LeakSMART Device and Components.

What is LeakSMART?

Plumbing leaks can happen at anytime, and can have any number of causes ranging from age to corrosion to blockages or lack of maintenance. They can create major problems in your plumbing and cause serious damage to your home, if not found and repaired quickly. Until recently, it was hard to detect leaks. Now, thanks to smart technology, you can reduce the risk of serious damage from leaks with LeakSMART installation. LeakSMART is a leak and flood protection device that connects to your computer or smart phone and alerts you to the presence of leaks in your plumbing lines. Not only does it monitor your system and detect leaks, it shuts your water off to protect you from any potential damage.

If you are concerned about protecting your home from plumbing leaks, you may want to consider LeakSMART installation in Saddle Brook, NJ. For more information about this device, or to get one installed, call 551-257-6200 to talk with the experts at Absolute Precision Plumbing and Heating.

How does LeakSMART work

LeakSMART works with your phone or computer to alert you to leaks in your plumbing system. With a LeakSMART Installation, there are three main components, the cut-in valve, the hub, and the sensors. A mobile app is available for download. The cut-in valve goes on the main water line, while sensors are placed on pipes and other areas where leaking is common. The sensors take about 5 seconds to detect any leaks present and send a message to the hub. The hub then alerts the shut-off valve, as well as the homeowner. You have the option to allow the hub to tell the valve to shut the water off automatically or you can shut it off manually with your phone.

How much does LeakSMART cost?

The complete system sells for $425. You can also buy individual components. The flood sensor costs about $70, the smart valve about $230 and the hub about $150. Many distributors will sell the complete package for much less than the manufacturer’s suggested retail price. If you buy the product and have it installed by a professional you receive a 5-year warranty. Your insurance company may also give you a discount if your LeakSMART installation is provided by a professional.

How to install LeakSMART

While we advise having a professional install your LeakSMART to ensure it works properly and to receive the 5-year warranty package, when you buy the device, it provides you with step-by-step installation instructions. The first step will require you to connect the device to the mobile app. Once the device is connected to the app, the valve will need to be connected to the main water line. You’ll begin by shutting off the water supply, and relieve water pressure by opening up hot and cold water handles on the faucet closest to the valve. An AC power source will also need to be close by so the valve can operate without relying on batteries except as a back-up power source. The device can operate on batteries if there is an electric outage. Install the valve with the included fittings, making sure the arrow on the side faces away from the meter. Once the device is installed, water is turned on, the power cord is attached, and the system is tested. 

How do I reset my LeakSMART sensor?

If your LeakSMART sensor needs to be reset for any reason it can easily be reset by following these steps.

  • Remove the battery door and install batteries.
  • Hold down the black button for 15 second, and then release it.
  • Remove and reinstall battery to power cycle the sensor
  • Once the sensor chirps, the blue LED light flashes 5 times every second.

How to reset LeakSMART valve

Use the manual open/close buttons on the valve or on the smartphone app. The leak has to be repaired or resolved to manually reopen the valve.

Does LeakSMART work with SmartThings?

If you have Samsung’s SmartThings connected, you may want to connect your LeakSMART device to it. While it is possible, you must note that LeakSMART is not officially supported by SmartThings. It’s possible that performance will vary, and Samsung will not be able to provide support if any problems develop.

Why sprinkler leaks after it is shut off?

If you have a leak in your sprinkler system, it’s possible for the leak to keep going even after the water has been shut off. One possible reason is low head drainage, which occurs because the lowest head on a zone drains water from lateral piping through the sprinkler. It may also be caused by water leaking through the zone valve, usually because debris is blocking the valve.

While it’s not recommended that a LeakSMART installation is used on a sprinkler system, you can pair the LeakiSMART with a Nest thermostat and help detect leaks in your air conditioner. If you have leaks in your air conditioner, you’ll require an air conditioning service to repair it. 

A Leaking Pipe

Where to buy LeakSMART

You can buy LeakSMART online through companies like Amazon or at big box home improvement stores or through distributors like Absolute Precision Plumbing and Heating. If you are interested in LeakSMART installation in Saddle Brook, NJ, give our team a call at 551-257-6200 and we can set you up, and ensure your device is working properly.

How To Run Gas Line Underground

A Gas Line Attached to a Residential Gas Meter.

What is gas line?

Gas lines are pipes or hoses that connect gas appliances like stoves, water heaters, and furnaces to the main natural gas supply. While installing gas lines is relatively easy, it generally requires the services of a licensed plumber. A professional will know precisely how to install the line to prevent gas leaks, which can be very dangerous. Professionals will also know local codes and what permits to obtain to install the gas line. Since some of the gas line may need to run underground, if new lines are being installed, professionals will also have the right equipment for the installation.

You especially want to employ a licensed professional plumber like those at Absolute Precision Plumbing and Heating for gas line repair. We provide full repair and installation services. Give us a call at 551-257-6200.

What can I use for a gas line? That’s a question you may consider if you plan to connect gas lines to your appliances. Below we answer the question about what sort of material you use for a gas line.

What kind of pipe is used for gas lines?

Here are the kind of pipes usable for gas lines:

  • Steel: Black steel is the most common used for gas piping, but galvanized steel and corrugated stainless steel tubing (CSST) is also used.
  • Copper: Copper is also used in some areas, although some utilities prohibit it.
  • Brass: Brass piping is similar to copper. Check with your gas company to see if brass or copper piping is allowed.

Can I use plumbers tape on a gas line?

If you are fitting gas lines to the connectors on a gas appliance you will use plumber’s tape, or Teflon tape, to seal the threads on the gas fitting. This will prevent leaks from occurring. Make sure, however, to get the right kind of plumber’s tape, the kind specifically designed for gas connections. This type of tape is yellow and it will be marked specifically for use with gas lines. It should only be applied on the fittings’ threads. Plumber’s tape designed for water pipes will not work. 

Using natural gas is a great way to save money on energy costs. Another way to save on energy costs is make certain your windows are in good repair and sealed tight from drafts. A window repair and sealing service will make sure the job is done right.

How much does it cost to get a gas line installed?

Costs will vary. On average, however, to run a new gas line costs about $500, and can range anywhere between $120 to $1,350. Additionally, if you are installing gas lines, you will pay anywhere between $45 to $150 per hour in labor costs for a master plumber. Call 551-257-6200 today to find out about our affordable rates.

In some cases, you may not need to install new gas lines for each appliance. For instance, if are connecting the gas line to water heater, you may just need to extend any pre-existing line. This can cut the installation costs by as much as 75%. It can be done yourself, but it’s preferable to call a professional to make sure the gas line and fittings all connect together correctly. Professionals can also safely check for and repair any leaks. 

If you are installing a new water heater, make sure to follow safety precautions. Before you begin, you’ll want to shut off the water and gas supply, and drain the tank by attaching a hose to the drain valve. Additionally, to allow air into the system, you’ll want to turn on a hot water faucet. 

With this or any other gas line installation, if you smell gas at any time, you may have a gas leak. If you suspect you do have a leak, open up all doors and windows, and leave the building before calling the gas company or fire department to shut off the gas. Once the gas is shut off a plumber can repair the leak.

Gas line underground

Some of the gas line may need to go underground. You will need to make sure all ordinances are followed and permits obtained. Sometimes gas companies will install gas lines underground for you or you may want to hire a professional plumber. Landscaping will need to be removed and a trench will need to be dug. Trench depth will be usually be regulated by building codes and you can find out from the city or gas company about how deep to dig the trench. The bottom of the trench will need to be leveled out before you call the gas company or plumber to lay the pipe. The line will need to be laid out between the gas meter and the house.  You will want to place a tarp on one or both sides of the trench to collect dirt, so it will be easier to shovel it back into the trench after the pipe is laid.

A Gas Line Next to a Brick Wall.

Gas line contractor

There are many gas line contractors in the area. If you need to install gas lines in Saddle Brook, NJ, you can always count on the professionals at Absolute Precision Plumbing and Heating for quality, affordable service. To schedule our services, call us at 551-257-6200.  

What are the Signs Your Hot Water Heater is Going Out?

A Top Down Look on Water Heater Repair

Understanding the Problem

“What’s wrong with my hot water heater?!” That’s a question that every plumber hears dozens of times throughout the year. Out of the many different segments of the plumbing system, a water heater creates some of the most frustrating and alarming problems for homeowners.

Today, we’re going to talk about the many signs your water heater will give you when it starts to break down. By the end, you should know how to respond in the event of an emergency. Let’s get started!

Understanding Water Heater Breakdowns

When it comes to water heater breakdowns, many homeowners won’t even realize there’s a problem until the unit shuts off completely. Others may experience a gradual reduction in functionality and efficiency, which will likely reveal itself in the monthly energy bill. Keep your eyes peeled for behavior that doesn’t seem normal for your appliance, and you’ll know when to call for water heater repair.

Usual Symptoms

What is the Most Common Problem With Water Heaters?

The side effects (leaks) of degraded residential roofing are obvious, but not everyone knows what to look for when their water heater starts to fail. Now that we’ve talked about the causes of water heater damage, let’s talk about what they look like inside your home. Below, you’ll find some of the most common problems that homeowners will see when their appliance breaks down.

Most Common Water Heater Problems

  • No hot water comes out of the heater.
  • The pilot light goes out and won’t come back on.
  • A hose or connecting pipe becomes detached and starts leaking water.
  • Colored water comes out of your hot water appliances.
  • The tank busts open and spills on the floor.

General Causes

What Would Cause a Hot Water Heater to Stop Working?

While they may operate on different power sources, a gas water heater and an electric water heater will encounter many of the same problems. In general, breakdowns fall within a few general categories, including: connection failure, isolated part degradation, and poor systemic conditions. Let’s briefly explain each category.

Some of the most frequently observed problems are produced by a loose hose or an out of place pipe connection. This may occur in the gas supply line, which is extremely dangerous for your home and family. The less threatening (but still irritating) possibility is a loose connection between the water supply line and the water heater.

Occasionally, age and frequent use simply causes a part to fail. This is an inevitable problem that homeowners face as their plumbing system gets older. When it comes to water heater repair, part failure is particularly common in supply pipes and in the burners (or electric heating element).

Finally, poor conditions may also create problems for multiple parts of your water heater. When the anode rod completely rusts over, for instance, corrosion accelerates in other parts of the holding tank. Hard water content produces many of the same effects: damaged tank lining and degraded piping.

Calling for Help

Who to Call for Water Heater Repair

90 times out of 100, you’re going to need to call your plumber to arrange repairs. If your water heater broke down suddenly, you’ll also want to contact your homeowner’s insurance company and explain the situation to them. There’s a good chance your insurance won’t cover the water heater repair cost, but they should cover the water damages. If your appliance is still under warranty, you’ll obviously want to call the manufacturer or plumber that provided it.

In the unlikely case your water heater malfunction was caused by a loose gas pipe, you need to call your plumber and gas company ASAP. Natural gas is highly flammable, combustible, and toxic. You may even need to evacuate your family and pets in the event of a severe gas leak.


How Many Years Does a Hot Water Heater Last?

This is a question that our plumbers hear pretty often. “How often do you need to replace a hot water heater?” Tank water heaters tend to last the shortest time, ranging anywhere from 8 to 13 years. If you own a heat pump water appliance, it may last up to 15.

Finally, you can expect a tankless model to last 20 years or more, regardless of the fuel type. Many plumbers say it’s easier to install water heater repair parts in tankless models, which is one reason why they last considerably longer.

Water Heater Repair vs Replace

The internal debate between water heater repair and early replacement is a true struggle for many homeowners. Simplify your decision process by weighing the cost of the repairs against the potential benefits. If a tank water heater already has 10 years off its estimated lifespan, squeezing out two or three more years of use isn’t worth paying thousands of dollars. However, if you can get 5 year or more from a relatively cheap water heater repair job, go for it!

A Plumber Finishes Up Water Heater Repair

Professional Water Heater Repair

Do you have serious concerns about your home’s water heater? Our team at Absolute Precision Plumbing and Heating would love to help you with timely, cost-effective repair service. Schedule your water heater repair in Saddle Brook, NJ by calling our friendly staff at 551-257-6200!

How Much Does a Bathroom Remodel Add To Home Value?

A Picture of a Luxury Bathroom Interior.

Ways in Which a Bathroom Remodel Adds Value To Your Home

Our homes are an investment and one of the ways to help our investment is by adding value to them. One of the best ways to add value to a residential property is to make home improvements. When we make improvements to our home, we are adding more curb appeal, which will always increase the value of a home. Homeowners who are interested in adding value to their homes tend to ask, “What home improvements add the most value?” A popular room that many people choose to remodel is a bathroom. Bathrooms are definitely one of the most used rooms in the home, but the look of bathrooms have typically been put on the back burner. In recent years, bathroom remodels have been become more popular. Considering we spend so much time in our bathrooms, its a good idea to make them look and feel luxurious. With a simple or extensive bathroom remodel, homeowners are able to increase the value of their home and have a bathroom they truly love.

Bathroom Remodel Vs Renovate

While a bathroom remodel and bathroom renovation are terms used simultaneously, they are actually not the same thing. When we remodel something, whether it be the bathroom, kitchen, or entire house, we are changing the look and structure of the room or house. Renovations involve restoring the look of a room without completely changing the structure. So, if you want to update the look of a room, you will want to renovate it; if you want to change the entire layout of the bathroom and look, you will want to consider a bathroom remodel.

A bathroom remodel involves a lot of work, as it is completely changing how your bathroom will look. Knowing the process of a bathroom remodel can better help you understand what goes into a bathroom remodel and whether or not you want to invest in this type of remodel. So, in what order should I remodel my bathroom? These are the order of steps that a remodel needs.

  • Choose the design of how you want your bathroom to look.
  • Remove all plumbing fixtures in the bathroom.
  • Demolish the bathroom.
  • Add a new shower or shower.
  • Install new floors.
  • Put up new drywall in the bathroom and paint.
  • Put in the new sink and new fixtures.
  • Install a new toilet or your existing toilet.

How Can I Save Money On My Bathroom Remodel?

Because a bathroom remodel is changing the whole appearance of a bathroom, it is going to be expensive. Due to the expenses that pile up, homeowners will usually ask, “What is the cheapest way to remodel a bathroom?” The first thought that pops in people’s minds are to take on some of the remodeling on their own. While it might seem like remodeling part of the bathroom could save you money, it’s honestly better to leave all bathroom remodeling to a professional contractor. This is because they have the skills, knowledge, and tools needed to remodel a bathroom without any mistakes.

If a homeowner has never remodeled a bathroom before, it can be very overwhelming. There is a chance that mistakes could be made, which could end up costing more money in the long run. Although its going to be more expensive, hiring a contractor will save you time and money. So next time someone asks, “Can you remodel a bathroom yourself?” Gently remind them that it might sound good, but it will be tedious, time-consuming, and might end up costing them more. Since remodeling a bathroom on your own isn’t an option (unless you have done it before), where to save on a bathroom remodel? Homeowners can save on money by taking care of the demolition, not using a lot of tiles, using more paint, invest in cheaper countertop materials, update the fixtures, and try to salvage your old bathtub or shower by updating them.

Bathroom Remodel Ideas

Ideas for Remodeling Your Bathroom

The idea of a bathroom remodel is incredibly exciting, but coming up with ideas can be a bit stressful. Homeowners have a broad idea of what they want, but conceptualizing those ideas can be a little bit trickier. Fortunately, if you hire a licensed contractor or even an interior designer, they can help you brainstorm some ideas and bring your vision to fruition. Another thing to consider is the bathroom size; bigger bathrooms might be a little easier to remodel but smaller bathrooms might be more difficult. How do you redo a small bathroom? Some ideas for remodeling a smaller bathroom would be moving the sink to the corner of the bathroom, have opening shelving, install the faucet on the wall, install mirrors on a whole wall, or use large patterns throughout the bathroom. Again, a contractor or interior designer can really give you some great ideas about how to remodel a small or large bathroom. If you are thinking about a bathroom remodel for your home, you can call on Absolute Precision Plumbing and Heating for bathroom plumbing in Saddle Brook, NJ. We are able to install faucets, bathtubs, showers, and other fixtures that you might need. Call us at 551-257-6200 for more information!